If you are not happy with the results below please do another search
TS1416 – Titaseal PTFE Premium Pink Water Tape 12mm x 0.1mm x 10m, rated working pressure 2000kPa, -10°c to +200°c AGA Approved Class 3 Conforms to AS 1272-1974 Rated working pressure 2000kPa Temperature range -10°C to +200°C Will not harden or crack on the joint Acts as a thread lubricant and anti-seize Prevents electrolytic corrosion […]
includes: Regulator and hose with POL connection (for outdoor use only), 100mm height, 720mm width, 382mm depth, 6.4kg weight, use with LPG cylinders 4.5kg to 9kg
includes: Regulator and hose with POL connection (for outdoor use only), 100mm height, 300mm height, 382mm depth, 3.4kg, use with LPG cylinders 4.5kg to 9kg
U.S Flare Nut and Tail brass Gas Fitting
Size: 8mm x 1/4″ BSPT (Left Hand)
LA-CO Cool Gel can be used to protect lead free valves during the soldering process and with any other soldering or brazing job to protect components and materials from costly heat damage. Cool Gel’s unique, no-drip gelled formula evaporates within 48 hours, eliminating clean-up. Using Cool Gel is easier than using a heat blanket and […]
LOXEAL Silicone tap grease is a food machinery grade lubricant suitable for use with taps, plumbing fittings, tools, hinges and other general applications. It combines the slip properties of silicone with the lubricating power of PTFE. Suitable for metal/plastic, metal/rubber, plastic/plastic and in some cases metal/metal combinations (not subjected to heavy loads). It is not […]
Anaerobic curing adhesive for sealing of metal thread joints only. Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association – Approval No. 5048) for working pressure up to 20 BAR. Approved for use with gaseous oxygen up to 10 BAR and + 60C (BAM Ref. No. ii-717/2007 E). WRAS listed […]
Anaerobic curing adhesive for sealing of metal thread joints only. Approved for Gas (DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association – Approval No. 5048) for working pressure up to 20 BAR. Approved for use with gaseous oxygen up to 10 BAR and + 60C (BAM Ref. No. ii-717/2007 E). WRAS listed […]
Medium viscosity anaerobic adhesive for thread locking of large diameter studs, nuts and bolts of all types that require to be dismantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocar and many chemicals.
Mon-Fri: 8am – 5pm
Saturday & Sunday: Closed
